You must set the ad_network_ads.txt file to be writable (check file name as well).
How to hook up a stereo [Archive] - RonFez.net Messageboard
PDA

View Full Version : How to hook up a stereo

bigtim666
04-21-2007, 06:59 PM
Hey guys i am hopeing you can help me out i have to hook up a 5 peice stereo set-up. The components are reciever, Turn table,tuner, amp and a 5 disk changer. I have never hooked up anything this difficult. If any of you know how to do this it would be much apericated and its all kenwood if that helps
PapaBear
04-21-2007, 08:10 PM
Plug the doohickeys into the thingamajigs. And don't forget to run a line to your computer, so you can make mp3's out of all the best albums.
Bob Impact
04-21-2007, 08:13 PM
Hey guys i am hopeing you can help me out i have to hook up a 5 peice stereo set-up. The components are reciever, Turn table,tuner, amp and a 5 disk changer. I have never hooked up anything this difficult. If any of you know how to do this it would be much apericated and its all kenwood if that helps

The inputs on the receiver should all be marked, you would plug the changer into CD, the Tuner into Tuner, the turntable into Phono. Plug the output of the Receiver into the Input of the amp and then connect your speakers to the amp. easy.
JPMNICK
04-21-2007, 09:13 PM
The inputs on the receiver should all be marked, you would plug the changer into CD, the Tuner into Tuner, the turntable into Phono. Plug the output of the Receiver into the Input of the amp and then connect your speakers to the amp. easy.

I could not have said it better myself.

just make sure your phono is grounded or else you get nasty feedback